COLD ROLLED STRIP
It is intended for to be applied as a packing material, for press forming of the products, for manufac-turing of the spring elements and springs themselves (excluding cranking elements) for creation of calibration tapes, different parts of machines and structures, resistant to aggressive environments, manufacturing of the a.c. magnetic wires components, parts of structures with high electrical re-sistance, as well as for other metal products manufacturing.
| REGULATORY DOCUMENTATION | STEEL GRADE | DIMENSION OF ROLLED PRODUCT, MM | ADDITIONAL DELIVERY CONDITIONS |
|---|---|---|---|
| GOST 19851-74 | 08 kp(ps); 3kp,ps, 08Ю (08Ю ОСВ subject to 20% СВ or ВГ) | 0.4-2.0х40-500 | Other widths are admitted upon agreement. Delivery of cold rolled strip under GOST 2284-79, GOST 2283-79 with surface type С,Ц without concrete class definition. Delivery under Protocol 14-226-72-94: strap made of steel grade 08Ю in the material condition ОМ, or drawing ОСВ (subject to 20% СВ or ВГ); strap made of steel grade 08ps in the condition of material ОМ |
| GOST 19851-74 TU U 14-4-479-2000 |
08ps | 0.5-1.2х40-500 | ВГ, surface finish group is II-III without concrete class definition, other dimensions are admitted upon agreement |
| Other widths are admitted upon agreement. Delivery of cold rolled strip under GOST 2284-79, GOST 2283-79 with surface type С,Ц without concrete class definition. Delivery under Protocol 14-226-72-94: band made of steel 08Ю in the material condition of ОМ, or drawing ОСВ (subject up to 20% СВ or ВГ); band made of steel 08ps in the condition of material ОМ | |||
| GOST 3559-75 | 08 kp(ps) | 0.3; 0.4;0.5х20; 40; 45; 50; 55; 60; 0.8; 1.0х45; 50; 55; 60; 0.3х321; 0.3; 0.4; 0.5; 0.8; 1.0х260 | Band of Б group, type Р-I,Р-II |
| GOST 3560-73 | 08 kp(ps) St3ps |
0.25; 0.3; 0.4; 0.5; 0.7; 0.8; 0.9; 1.0х20; 0.8; 0.9; 1.0; 1.2; 1.5х30 |
Condition of material – М |
| GOST 503-81 GOST 19904-90 |
08 kp(ps) | 0.3-0.45 (incl.)х40-300*; (over) 0.45-1.5х40-500*; 0.4-1.0х10; 0.4-0.6х12.7; 0.25-1.0х20; 0.3-0.5х14; 15; 22; 24; 0.5х28.0; 0.8-1.0х25.4 |
М-ОМ, 2-4 surface finishing group. |
| GOST 503-81 GOST 19904-90 |
08Ю | 0.8-2.0х100-500 | М-ОМ, 2-4 (without concrete class definition of the surface finishing group) surface finishing group. |
| Protocol 14-226-112-97 | 08Ю | 0.4х50-60.220 | Other widths are admitted upon agreement. (within the range 40-520 mm). |
| Protocol 14-226-72-94 | 08ps | 0.5; 0.8; 1.0; 1.2;х100-300 | Other widths are admitted upon agreement. Delivery of cold rolled strip under GOST 2284-79, GOST 2283-79 with surface type С,Ц without concrete class definition. Delivery under Protocol 14-226-72-94: bands made of steel grade 08Ю in condition of material ОМ, or drawing ОСВ (subject to up 20% СВ or ВГ); band made of steel 08ps in condition of material ОМ |
| 08Ю | 0.25; 0.4; 0.8х100-300 | Other widths are admitted upon agreement. Delivery of cold rolled strip under GOST 2284-79, GOST 2283-79 with surface type С,Ц without concrete class definition. Delivery under Protocol 14-226-72-94: bands made of steel grade 08Ю in condition of material ОМ, or drawing ОСВ (subject to up 20% СВ or ВГ); band made of steel 08ps in condition of material ОМ | |
| TU U 24.3-23365425-682:2012 | 08 kp,ps | 0.25-0.5х46-430 | М-ОМ, 2-4 surface finishing group (other dimensions are admitted upon agreement) |
COLD-ROLLED STRIP
| SIZES, MM | REGULATORY DOCUMENTATION |
ADDITIONAL DELIVERY CONDITIONS |
|---|
| 0,4х50-60, 220 0,8-2,0х100-500 0,4-2,0х40-500 0,25; 0,4; 0,8х100-300 |
Protocol 14-226-112-97 GOST 503-81 GOST 19904-90 GOST 19851-74 Protocol 14-226-72-94 |
Other widths are allowed by agreement (in the range of 40-520 mm, except for the width of 41 mm). M-OM, 2-4 group of surface finish. The minimum width according to the thickness Other widths are allowed by agreement (except for the width 41mm) Minimum width depending on the thickness according to the specifications slitting. SALT extractor (subject to 20% MC or HS) Material condition OM or hood SALT (subject to 20% MC or HS). Other widths are allowed by agreement. |
| 0,7-2,0х40-465 | GOST 2284-79 GOST 19904-900 |
Other widths are allowed by agreement (except for the width of 41mm). Minimum width depending on the thickness according to the specifications slitting. Surface type C, D without specifying |
| 0,8-2,0х100-465 | Protocol 14-226-72-94 | Other widths are allowed by agreement. Minimum width depending on the thickness according to the specifications slitting. |
| 0,3-0,5х40-360; 0,3-0,5х420-500; 0,8-2,0х60-500 0,8-2,0х60-465 0,3-0,45(included)х40-250; (more) 0,45-0,5х40-300 |
TU U 24.3-23365425-682:2012 GOST 2283-79, GOST 19904-90 GOST 2283-79 |
Other sizes allowed by agreement. Surface type C, D (without specifying). Mechanical properties are optional Other widths are allowed by agreement. Surface type C, D (without specifying) Other widths are allowed by agreement (except for the width of 41mm). Surface type C, D (without specifying) |
| 0,4-2,0х40-500 | GOST 19851-74 | Other widths are allowed by agreement (* except for the width 41mm) Minimum width depending on the thickness according to the specifications slitting. |
| 0,25; 0,3; 0,4; 0,5; 0,7; 0,8; 0,9; 1,0х20; 0,8; 0,9; 1,0; 1,2; 1,5х30; 0,4-2,0х40-500 |
GOST 3560-73 GOST 19851-74 |
Material condition – M Other widths are allowed by agreement (* except for the width 41mm) Minimum width depending on the thickness according to the specifications slitting. |
| 0,3; 0,4;0,5х20; 40; 45; 50; 55; 60; 0,8; 1,0х45; 50; 55; 60; 0,3х321; 0,3; 0,4; 0,5; 0,8; 1,0х260 0,25; 0,3; 0,4; 0,5; 0,7; 0,8; 0,9; 1,0х20; 0,8; 0,9; 1,0; 1,2; 1,5х30 0,25-0,5х46-430 0,3-0,45 (включ)х40-300*; (свыше) 0,45-1,5х40-500*; 0,4-1,0х10; 0,4-0,6х12,7; 0,25-1,0х20; 0,3-0,5х14; 15; 22; 24; 0,5х28,0; 0,8-1,0х25,4 0,4-2,0х40-500 |
ГОСТ 3559-75 ГОСТ 3560-73 ТУ У 24.3-23365425-682:2012 ГОСТ 503-81 ГОСТ 19904-90 ГОСТ 19851-74 |
Лента группы Б, вид Р-I,Р-II Состояние материала – М Состояние материала- М-ОМ, 2-4 группа отд. пов. (допускаются по согласованию другие размеры) *За исключением ширины 41мм. Состояние материала – М-ОМ, 2-4 группа отделки поверхности. Поставка по ГОСТ 503-81 только для толщин 0,3-0,5 мм. Минимальная ширина в зависимости от толщины Допускаются другие ширины по согласованию (*за исключением ширины 41мм) Минимальная ширина в зависимости от толщины согласно спецификации агрегатов продольной резки. |
| 0,3; 0,4;0,5х20; 40; 45; 50; 55; 60; 0,8; 1,0х45; 50; 55; 60; 0,3х321; 0,3; 0,4; 0,5; 0,8; 1,0х260 0,25; 0,3; 0,4; 0,5; 0,7; 0,8; 0,9; 1,0х20; 0,8; 0,9; 1,0; 1,2; 1,5х30 0,25-0,5х46-430 0,3-0,45 (включ)х40-300*; (свыше) 0,45-1,5х40-500*; 0,4-1,0х10; 0,4-0,6х12,7; 0,25-1,0х20; 0,3-0,5х14; 15; 22; 24; 0,5х28,0; 0,8-1,0х25,4 0,4-2,0х40-500 0,5; 0,8; 1,0; 1,2;х100-300 0,5; 0,7; 1.0; 1,2х40-690 |
ГОСТ 3559-75 ГОСТ 3560-73 ТУ У 24.3-23365425-682:2012 ГОСТ 503-81 ГОСТ 19904-90 ГОСТ 19851-74 Протокол 14-226-72-94 ГОСТ 19851-74 ТУ У 14-4-479-2000″ |
лента группы Б, вид Р-I,Р-II Состояние материала – М Состояние материала- М-ОМ, 2-4 группа отд. пов. (допускаются по согласованию другие размеры) *За исключением ширины 41мм.Состояние материала- М-ОМ, 2-4 группа отделки поверхности. Поставка по ГОСТ 503-81 только для толщин 0,3-0,5 мм. Минимальная ширина в зависимости от толщины Допускаются другие ширины по согласованию (*за исключением ширины 41мм) Минимальная ширина в зависимости от толщины согласно спецификации агрегатов продольной резки. Допускаются другие ширины по согласованию. (*за исключение ширины 41 мм), ВГ, группа отделки поверхности II-III без конкретизац. |
EXPANSED STEEL SHEET ESS (PVC, PVC)
It is used as a grill at the inspection windows in the machine tool industry, in tool engineering, machine building, for development of floor covering, grounds, stairway steps, TV-towers and other industrial buildings and structures.
Besides, expanded steel sheet is used for fencing of different objects (requirement for safety and esthetics), for manufacturing of supports and walling while sinking operations in mines, screening the loosened rock, for manufac-turing of different tare types, open-air cages, safety enclosures of ground plots as well as a type of reinforce while plaster application.
| REGULATORY DOCUMENTATION | STEEL GRADE | DIMENSION OF ROLLED PRODUCT, MM | ADDITIONAL DELIVERY CONDITIONS |
|---|---|---|---|
| TU U 27.1-00190319-1301-2003 | St0, St1-3 kp(ps) 08-15 kp(ps) |
2.0-6.0?500-1250?1000-3500 | ВГ, surface finishing group II-III without concrete class definition, other dimensions are admitted upon agreement. |
BLACK PLATE
It is used mainly in electrical engineering industry and machine building, for production of tare in food industry, paint and varnish industry, packing of building materials, covers for capping the glass cans and bottles.
| REGULATORY DOCUMENTATION | STEEL GRADE | DIMENSION OF ROLLED PRODUCT, MM | ADDITIONAL DELIVERY CONDITIONS |
|---|---|---|---|
| TU U 14-4-413-97 | ОН (general purpose) | 0.20; 0.22; 0.25; 0.28; 0.32; 0.36; 0.40х120-520 coils | Other widths upon agreement. |
BLACK TIN-PLATE
Scheme packing rolls of black tin.
Band width of 120 – 239 mm.
Band width of 239 mm or more.
| DIMENSIONS HIRE, MM | LEGAL DOCUMENTS | ADDITIONAL TERMS OF DELIVERY |
|---|---|---|
| 0,20; 0,22; 0,25; 0,28; 0,32; 0,36; 0,40х120-520 (coil) | TU U 14-4-413-97 | GP (general purpose). Other widths are in agreement |
ROLL-FORMED SHAPES
This type of rolled stock is actively used by machine building and railway cars building enterprises for welded, rivet-ed or bolted structures used in the products, mainly, without any additional thermal treatment, as well as in the building industry when building the prefabricated buildings and rapidly erected structures.
 |
Bent profiles All the profiles in single file |
Steel bent corners
Rolled steel channels bent
Steel profiles bent Korytny equilateral
zs-profil_koritnie.pdf (1,3 МБ)
Steel bent profile Zeta equilateral
zs-profil_zetovie.pdf (1,3 МБ)
Steel profiles bent C-shaped equilateral
Profiles closed non-welded rectangular and square
zs-profil_zamknutie.pdf (1,3 МБ)
Bent corrugated steel profiles
Special steel profiles bent
| REGULATORY DOCUMENTATION |
STEEL GRADE | DIMENSION OF ROLLED PRODUCT, MM |
ADDITIONAL DELIVERY CONDITIONS |
|---|---|---|---|
| According to Catalogue |
Used in railway cars building, machine building, ship building industries and in construction (including light metal structures) |
2.0-8.0х30-1200 | ВГ, surface finishing group II-III without concrete class definition, other dimensions are admitted upon agreement |
