Cold-rolled products

COLD-ROLLED SHEET 0,5 -2 MM

Cold structural rolled products are used in manufacturing of coated products, furniture, shelf, tare for POL and household appliances.

REGULATORY DOCUMENTATION	STEEL GRADE	DIMENSION OF ROLLED PRODUCT, MM	ADDITIONAL DELIVERY CONDITIONS
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	St1-3kp(ps)	0,8-1,0х1000-1250х2000-2500 1,1-2,0х1000-1500х2000-2500	Milled edge. On agreement it is possible to deliver with sheared edge for rolled products in sheets with width up to 1250 mm. II-III surface finish group. Killed steel rolled products supply acc. to category 4 DSTU 2834-94 (GOST 16523-97). Delivery in coils of weight up to 15 tons is possible.
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	St1-3sp	0,8-0,9х1000х2000 1,0-1,5х1000-1250х2000-2500 1,6-2,0х1000-1400х2000-2500 For steel grade 3sp with thickness 1,6-1,9 mm maximum width – 1250 mm.	Milled edge. On agreement it is possible to deliver with sheared edge for rolled products in sheets with width up to 1250 mm. II-III surface finish group. Killed steel rolled products supply acc. to category 4 DSTU 2834-94 (GOST 16523-97). Delivery in coils of weight up to 15 tons is possible.
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	20	0,8-0,9х970 coil 1,0-1,5х1000-1220 coil 1,6-2,0х1000-1370 coil	600 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	10, 15	0,8-1,5х1000-1220 coil 1,6-2,0х1000-1370 coil	Sheared edge. II-III surface finish group. Inner diameter – 500 + 50 mm, 508 + 50 mm or 610 + 50 mm
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	20	0,8-0,9х1000 coil 1,0-1,5х1000-1250 coil 1,6-2,0х1000-1400 coil	Milled edge. II-III surface finish group. Coil inner diameter – 750 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
	10, 15	0,8-1,5х1000-1250 coil	Milled edge. II-III surface finish group. Coil inner diameter – 750 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
	10, 15	1,6-2,0х1000-1400 coil	Milled edge. II-III surface finish group. Coil inner diameter – 750 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
DSTU 2834-94 (GOST 16523-97) GOST 9045-93 GOST 19904-90	08-20 kp(ps), 08Ю ОСВ, at the condition up to 20% СВ or ВГ	0.5х1000 coils 0.6х1000-1190 coils 0.65-0.7х1000-1220 coils. 0.8-0.9х1000-1330 coils. 1.0-2.0х1000-1470 coils. For rolling of steel grades15 kp(ps) thickness 1.0mm maximum width of rolled stock -1330mm, of steel grades 20kp(ps) thickness 0.8-1.0mm maximum width of rolled stock -1220mm, thickness 1.1-1.2mm maximum width of rolled stock -1330mm	Sheared- edge, mass is up to 15 t, internal diameter is 500 + 50 mm, 508 + 50 mm or 610 + 50 mm, 600 + 50 mm. Upon agreement, it is allowed to supply rolled stock out of steel grades 08 kp(ps), 08Ю with dimensions 0.8-0.9х1335-1370mm
	08-20 kp(ps), 08Ю ОСВ, at the condition up to 20% СВ or ВГ	0.5х1000-1050 coils; 0.6х1000-1220 coils 0.65-0.7х1000-1250 coils; 0.8-0.9х1000-1360 coils 1.0-2.0х1000-1500 coils For rolling of steel grades 15 kp(ps) thickness 1.0mm maximum width of rolled stock is -1360mm, of steel grades 20 kp(ps) with thickness 0.8-1.0 mm maximum width of rolled stock is -1250 mm, тоthickness 1.1-1.2 mm maximum width of rolled stock is -1360mm	Mill edge, II-III gr. of surface finish, internal diameter 750 + 50 mm, mass up to 15 t. Upon agreement, it is allowed to supply rolled stock out of steel grades 08kp(ps), 08Ю dimensions 0.8-0.9х1365-1400mm
	08-20 kp(ps)	0.5-1.5х1000 coils	Sheared edge, internal diameter is 500 + 50 mm, coil mass is 3 t to 6 t
Protocol 14-226-132-2000	08 kp(ps)	0.5х1000 coils (rolled stock production of other dimensions is admitted)	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
Protocol 14-226-186-2014	10,15	0.8-1.5х1000-1250mm 1.6-2.0х1000-1400mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is – 760+50mm.
	20	0.8-0.9х1000mm 1.0-1.5х1000-1250mm 1.6-2.0х1000-1400mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
	08-10 kp(ps),08Ю	0.5х1000-1050mm 0.6х1000-1220mm 0.65-0.7х1000-1250mm 0.8-0.9х1000-1360mm 1.0-2.0х1000-1500mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
	15 kp(ps)	0.5х1000-1050mm 0.6х1000-1220mm 0.65-0.7х1000-1250mm 0.8-10х1000-1360mm 1.1-2.0х1000-1500mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
	20 kp(ps)	0.5х1000-1050mm 0.6х1000-1220mm 0.65-1.0х1000-1250mm 1.1-1.2х1000-1360mm 1.3-2.0х1000-1500mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.

COLD ROLLED COIL 0,5 -2 MM

Cold structural rolled products are used in manufacturing of coated products furniture, shelf, tare for POL and household appliances.

REGULATORY DOCUMENTATION	STEEL GRADE	DIMENSION OF ROLLED PRODUCT, MM	ADDITIONAL DELIVERY CONDITIONS
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	St1-3kp(ps)	0,8-1,0х1000-1250х2000-2500 1,1-2,0х1000-1500х2000-2500	Milled edge. On agreement it is possible to deliver with sheared edge for rolled products in sheets with width up to 1250 mm. II-III surface finish group. Killed steel rolled products supply acc. to category 4 DSTU 2834-94 (GOST 16523-97). Delivery in coils of weight up to 15 tons is possible.
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	St1-3sp	0,8-0,9х1000х2000 1,0-1,5х1000-1250х2000-2500 1,6-2,0х1000-1400х2000-2500 For steel grade 3sp with thickness 1,6-1,9 mm maximum width – 1250 mm.	Milled edge. On agreement it is possible to deliver with sheared edge for rolled products in sheets with width up to 1250 mm. II-III surface finish group. Killed steel rolled products supply acc. to category 4 DSTU 2834-94 (GOST 16523-97). Delivery in coils of weight up to 15 tons is possible.
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	20	0,8-0,9х970 coil 1,0-1,5х1000-1220 coil 1,6-2,0х1000-1370 coil	600 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	10, 15	0,8-1,5х1000-1220 coil 1,6-2,0х1000-1370 coil	Sheared edge. II-III surface finish group. Inner diameter – 500 + 50 mm, 508 + 50 mm or 610 + 50 mm
DSTU 2834-94 (GOST 16523-97) GOST 19904-90	20	0,8-0,9х1000 coil 1,0-1,5х1000-1250 coil 1,6-2,0х1000-1400 coil	Milled edge. II-III surface finish group. Coil inner diameter – 750 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
	10, 15	0,8-1,5х1000-1250 coil	Milled edge. II-III surface finish group. Coil inner diameter – 750 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
	10, 15	1,6-2,0х1000-1400 coil	Milled edge. II-III surface finish group. Coil inner diameter – 750 + 50 mm, weight up to 15 tons. For rolled products from steel grade 20 supply acc. to category 4 DSTU 2834-94 (GOST 16523-97).
DSTU 2834-94 (GOST 16523-97) GOST 9045-93 GOST 19904-90	08-20 kp(ps), 08Ю ОСВ, at the condition up to 20% СВ or ВГ	0.5х1000 coils 0.6х1000-1190 coils 0.65-0.7х1000-1220 coils. 0.8-0.9х1000-1330 coils. 1.0-2.0х1000-1470 coils. For rolling of steel grades15 kp(ps) thickness 1.0mm maximum width of rolled stock -1330mm, of steel grades 20kp(ps) thickness 0.8-1.0mm maximum width of rolled stock -1220mm, thickness 1.1-1.2mm maximum width of rolled stock -1330mm	Sheared- edge, mass is up to 15 t, internal diameter is 500 + 50 mm, 508 + 50 mm or 610 + 50 mm, 600 + 50 mm. Upon agreement, it is allowed to supply rolled stock out of steel grades 08 kp(ps), 08Ю with dimensions 0.8-0.9х1335-1370mm
	08-20 kp(ps), 08Ю ОСВ, at the condition up to 20% СВ or ВГ	0.5х1000-1050 coils; 0.6х1000-1220 coils 0.65-0.7х1000-1250 coils; 0.8-0.9х1000-1360 coils 1.0-2.0х1000-1500 coils For rolling of steel grades 15 kp(ps) thickness 1.0mm maximum width of rolled stock is -1360mm, of steel grades 20 kp(ps) with thickness 0.8-1.0 mm maximum width of rolled stock is -1250 mm, тоthickness 1.1-1.2 mm maximum width of rolled stock is -1360mm	Mill edge, II-III gr. of surface finish, internal diameter 750 + 50 mm, mass up to 15 t. Upon agreement, it is allowed to supply rolled stock out of steel grades 08kp(ps), 08Ю dimensions 0.8-0.9х1365-1400mm
	08-20 kp(ps)	0.5-1.5х1000 coils	Sheared edge, internal diameter is 500 + 50 mm, coil mass is 3 t to 6 t
Protocol 14-226-132-2000	08 kp(ps)	0.5х1000 coils (rolled stock production of other dimensions is admitted)	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
Protocol 14-226-186-2014	10,15	0.8-1.5х1000-1250mm 1.6-2.0х1000-1400mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is – 760+50mm.
	20	0.8-0.9х1000mm 1.0-1.5х1000-1250mm 1.6-2.0х1000-1400mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
	08-10 kp(ps),08Ю	0.5х1000-1050mm 0.6х1000-1220mm 0.65-0.7х1000-1250mm 0.8-0.9х1000-1360mm 1.0-2.0х1000-1500mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
	15 kp(ps)	0.5х1000-1050mm 0.6х1000-1220mm 0.65-0.7х1000-1250mm 0.8-10х1000-1360mm 1.1-2.0х1000-1500mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.
	20 kp(ps)	0.5х1000-1050mm 0.6х1000-1220mm 0.65-1.0х1000-1250mm 1.1-1.2х1000-1360mm 1.3-2.0х1000-1500mm	Mill edge. III group of surface finish, without determination of mechanical properties. Coils internal diameter is 760+50mm.

COLD-ROLLED SHEET

SIZES, MM	REGULATORY DOCUMENTATION	ADDITIONAL DELIVERY CONDITIONS

0,5-0,6х1000х2000-2500
0,7х1000-1250х2000-2500
0,8-1,2х1000-1400х2000-2500

TU U 14-4-479-2000

Edge NO, O (O edge Delivered in sheets – up to 1250mm width). Lack defect “fish scales” is not guaranteed.

0,8-1,5х1000-1250х2000-2500
1,6-2,0х1000-1400х2000-2500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In agreement available with
a cut edge on for hire up to 1250 mm;
II-III surface finish group.
In agreement is possible to produce
plates with thickness of 5.0 mm,
the edge of O.

0,7-2,0х1000-1080х2000-2500
2,5-2,9х1000-1250х2000-3000
3,0-3,9х1000-1250х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST16523-97)
GOST 19904-90

NO, II-III surface
finish group.
Edge O, II-III surface
finish group.

0,8-0,9х1000х2000-2500
1,0-1,5х1000-1250х2000-2500
1,6-2,0х1000-1400х2000-2500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In agreement available
with a cut edge on for hire up to
1250 mm; II-III surface finish group.
Supply category 4 DSTU 2834-94
(GOST 16523-97) In agreement is
possible to produce plates with
thickness of 5.0 mm, the edge
of O.

0,8-1,0х1000-1250х2000-2500
1,1-2,0х1000-1500х2000-2500
2,0-3,9х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)

Edge NO. In agreement
available with a cut
edge on rolled sheets
for widths up to
1250mm. II-III surface
finish group.
Edge O, II-III surface
finish group.

0,8-1,0х1000-1250х2000-2500
1,1-2,0х1000-1500х2000-2500
2,0-3,9х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)

Edge NO. In agreement available
with a cut edge on rolled
sheets for widths up to
1250mm. II-III surface
finish group.
Edge O, II-III surface
finish group.

0,8-1,0х1000-1250х2000-2500
1,1-2,0х1000-1500х2000-2500
2,0-3,9х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)

Edge NO. In agreement available
with a cut edge on rolled
sheets for widths up to
1250mm. II-III surface
finish group. Edge O,
II-III surface finish
group.

0,8-0,9х1000х2000
1,0-1,5х1000-1250х2000-2500
1,6-2,0х1000-1400х2000-2500
2,0-3,9х1000-1350х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)

Edge NO. In agreement
available with a cut
edge on rolled sheets
for widths up to
1250mm. II-III
surface finish group.
Delivery of category
4 DSTU 2834-94
(GOST 16523-97).
Edge O, II-III
surface finish
group.

0,8-1,4х1000-1050х2000-2500
1,5-2,0х1000-1250х2000-2500
2,0-2,9х1000-1100х2000-3500
3,0-3,9х1000-1250х2000-3500

TU 24.1-23365425-687:2013
DSTU 2834-94
(GOST 16523-97)
TU 24.1-23365425-687:2013 GOST
19904-90

NO, II-III surface
finish group
Edge O, II-III surface
finish group.

0,5-0,6х1000-1050х2000
0,65-0,7х1000-1250х2000-2500
0,8-1,0х1000-1360х2000-2500
1,1-2,0х1000-1500х2000-3500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In agreement
available with a cut
edge on rolled widths
up to 1250mm. II-III
surface finish group.
In agreement is
possible to produce
plates with thickness
of 5.0 mm, the edge
of O.

0,5-0,6х1000-1050х2000
0,65-0,7х1000-1250х2000-2500
0,8-0,9х1000-1360х2000-2500
1,0-2,0х1000-1500х2000-3500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In
agreement available
with a cut edge on
rolled widths up
to 1250mm. II-III
surface finish
group. In agreement
is possible to
produce plates
with thickness
of 5.0 mm, the
edge of O.

2,1-4,0х1000-1250х2000-3000

TU U 27.1.4-516-2002

Edge O, II-III surface
finish group.

2,5-3,9х1000-1250х2000-3500

GOST 19904-90
GOST 17066-80

Edge O, II-III
surface finish group,
without specifying
the category 1-4.

0,8-0,9х1000х2000
1,0-1,5х1000-1250х2000-2500
1,6-2,0х1000-1400х2000-2500
2,0-3,9х1000-1350х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)

Edge NO. In
agreement available
with a cut edge on
rolled sheets for
widths up to
1250mm. II-III
surface finish
group. Delivery
of category
4 DSTU 2834-94
(GOST 16523-97).
Edge O,
II-III surface
finish group.

0,5-0,6х1000-1050х2000
0,65-0,7х1000-1250х2000-2500
0,8-0,9х1000-1360х2000-2500
1,0-2,0х1000-1500х2000-3500
2,0-4,0х1000-1450х2000-3500

GOST 9045-93
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In agreement
available with a cut edge
on rolled widths up to
1250mm. II-III surface
finish group. In agreement
allowed supply rental
sizes 0.8-0.9
h1365-1400h2000-2500mm.
When ordering 08U
drawability SALT
provide supply to
20% DM or SH.
In agreement is possible
to produce plates with
thickness of 5.0 mm,
the edge of O. When
ordering 08U drawability
SALT provide supply to
10% DM, and when
ordering drawability
NE – up to 2% HS.

0,5-0,6х1000-1050х2000
0,65-0,7х1000-1250х2000-2500
0,8-1,0х1000-1250х2000-2500
1,1-1,2х1000-1360х2000-3500
1,3-2,0х1000-1500х2000-3500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In
agreement available
with a cut edge
on rolled widths
up to 1250mm.
II-III surface
finish group.
In agreement is
possible to produce
plates with thickness
of 5.0 mm, the
edge of O.

0,8-1,5х1000-1250х2000-2500
1,6-2,0х1000-1400х2000-2500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

Edge NO. In agreement
available with a cut
edge on for hire up
to 1250 mm; II-III
surface finish group.
In agreement is
possible to produce
plates with thickness
of 5.0 mm, the edge
of O.

1,3-1,6х1000-1250х2000-2500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. II-III
surface finish
group.

0,8-0,9х1000х2000
1,0-1,5х1000-1250х2000-2500
1,6-1,9х1000-1250х2000-2500
2,0х1000-1400х2000-2500
2,0-3,9х1000-1350х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)

Edge NO. In agreement
available with a cut
edge on rolled sheets
for widths up to 1250mm.
II-III surface finish
group. Delivery of
category
4 DSTU 2834-94
(GOST 16523-97).
Delivery of category
4 DSTU 2834-94
(GOST 16523-97).

0,5-0,6х1000-1050х2000
0,65-0,7х1000-1250х2000-2500
0,8-0,9х1000-1360х2000-2500
1,0-2,0х1000-1500х2000-3500
2,0-4,0х1000-1450х2000-3500

DSTU 2834-94
(GOST 16523-97)
GOST 9045-93
GOST 19904-90
TU 14-15-309-93
GOST 19904-90

COLD ROLLED COIL

SIZES, MM	REGULATORY DOCUMENTATIONЯ	ADDITIONAL DELIVERY CONDITIONS

0,8-1,0х1000-1250
1,1-2,0х1000-1500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. The inner diameter
of 750 ± 50 mm. In agreement
can be supplied with cut
edge O. II-III surface
finish group. Coil weight
up to 15 tons

0,8-1,0х1000-1250
1,1-2,0х1000-1500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. The inner
diameter of 750 ± 50 mm.
In agreement can be
supplied with cut edge
O. II-III surface
finish group. Coil
weight up to 15 tons

0,8-1,0х1000-1250
1,1-2,0х1000-1500

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. The inner
diameter of 750 ± 50 mm.
In agreement can be
supplied with cut edge
O. II-III surface
finish group. Coil
weight up to 15 tons

0,8-0,9х1000
1,0-1,5х1000-1250
1,6-2,0х1000-1400

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. The inner
diameter of 750 ± 50 mm.
In agreement can be
supplied with cut edge
O. II-III surface
finish group. Delivery
of category 4
DSTU 2834-94
(GOST 16523-97).
Coil weight up to
15 tons

0,8-0,9х1000
1,0-1,5х1000-1250
1,6-2,0х1000-1400

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. The inner
diameter of 750 ± 50 mm.
In agreement can be
supplied with cut edge
O. II-III surface
finish group. Delivery
of category 4
DSTU 2834-94
(GOST 16523-97).
Coil weight up
to 15 tons

0,8-0,9х1000
1,0-1,5х1000-1250
1,6-1,9х1000-1250
2,0х1000-1400

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. The inner
diameter of 750 ± 50 mm.
In agreement can be
supplied with cut edge
O. II-III surface
finish group. Delivery
of category 4
DSTU 2834-94
(GOST 16523-97).
Coil weight up
to 15 tons

1,3-1,6х1000-1250

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. II-III
surface finish group.
The inner diameter of
750 ± 50 mm. Coil
weight up to 15 tons

0,5-0,6х1000
0,7х1000-1250
0,8-1,2х1000-1400

TU U 14-4-479-2000

Edge NO. In agreement
can be supplied with cut
edge O. Lack defect
“fish scales” is not
guaranteed. Coil
weight up to 15
tons

0,5х1000-1050
0,6х1000-1220
0,65-0,7х1000-1250
0,8-0,9х1000-1360
1,0-2,0х1000-1500
0,5х1000
0,6х1000-1190
0,65-0,7х1000-1220
0,8-0,9х1000-1330
1,0-2,0х1000-1470
0,5х1000

ДСТУ 2834-94
(ГОСТ 16523-97),
ГОСТ 9045-93
ГОСТ 19904-90
ДСТУ 2834-94
(ГОСТ 16523-97),
ГОСТ 9045-93
ГОСТ 19904-90
Протокол
14-226-132-2000

Edge NO, II-III c.
surface finishes.
Inner diameter of
750 ± 50 mm, coil
weight up to 15 tons
By agreement allowed
supply rental sizes
0.8-0.9 h1365-1400mm
Edge O, II-III c.
surface finishes.,
weight up to 15 tons
(3 m to 6 m –
“Zundvig”).
The inner diameter
of 500 ± 50 mm
(“Zundvig”)
508 ± 50 mm or
610 mm ± 50 ASP
(5) 600 ± 50 mm
(APR-4.) In
agreement allowed
supply rental
sizes 0.8-0.9
h1335-1370mm
Allowed to produce
rolled other sizes.
Edge. III surface
finish group.
Without determining
the mechanical
properties. Inner
diameter of
760 ± 50mm

0,5х1000-1050
0,6х1000-1220
0,65-0,7х1000-1250
0,8-0,9х1000-1360
1,0-2,0х1000-1500
0,5х1000
0,6х1000-1190
0,65-0,7х1000-1220
0,8-0,9х1000-1330
1,0-2,0х1000-1470

GOST 9045-93
GOST 19904-90
GOST 9045-93
GOST 19904-90

Edge NO, II-III c.
surface finishes.
Inner diameter of
750 ± 50 mm, weight
up to 15 tons By
agreement allowed
supply rental sizes
0.8-0.9 h1365-1400mm
Edge O, II-III c.
surface finishes.,
weight up to 15 tons
(3 m to 6 m –
“Zundvig”). The
inner diameter
of 500 ± 50 mm
(“Zundvig”)
508 ± 50 mm or
610 mm ± 50 ASP
(5) 600 ± 50 mm
(APR-4.) In
agreement
allowed supply
rental sizes
0.8-0.9
h1335-1370mm

0,5х1000-1050
0,6х1000-1220
0,65-0,7х1000-1250
0,8-0,9х1000-1360
1,0-2,0х1000-1500
0,5х1000
0,6х1000-1190
0,65-0,7х1000-1220
0,8-0,9х1000-1330
1,0-2,0х1000-1470

ДСТУ 2834-94
(ГОСТ 16523-97),
ГОСТ 9045-93
ГОСТ 19904-90
ДСТУ 2834-94
(ГОСТ 16523-97),
ГОСТ 9045-93
ГОСТ 19904-90

Edge NO, II-III c.
surface finishes.
Inner diameter of
750 ± 50 mm, coil
weight up to 15
tons
Edge O, II-III c.
surface finishes.,
weight up to 15
tons (3 m to
6 m – “Zundvig”).
Ext. diameter of
500 ± 50 mm
(“Zundvig”)
508 ± 50 mm or
610 mm ± 50 ASP
(5) 600 ± 50 mm
(APR-4.)

0,5х1000-1050
0,6х1000-1220
0,65-0,7х1000-1250
0,8-1,0х1000-1360
1,1-2,0х1000-1500
0,5х1000
0,6х1000-1190
0,65-0,7х1000-1220
0,8-1,0х1000-1330
1,1-2,0х1000-1470

DSTU 2834-94
(GOST 16523-97),
GOST 9045-93
GOST 19904-90
DSTU 2834-94
(GOST 16523-97),
GOST 9045-93
GOST 19904-90

Edge NO, II-III c.
surface finishes.
Inner diameter of
750 ± 50 mm, coil
weight up to 15 tons
Edge O, II-III c.
surface finishes.,
weight up to 15
tons (3 m to 6 m –
“Zundvig”). The
inner diameter of
500 ± 50 mm
(“Zundvig”)
508 ± 50 mm or
610 mm ± 50 ASP
(5) 600 ± 50 mm
(APR-4.)

0,8-1,5х1000-1250
1,6-2,0х1000-1400
0,8-1,5х1000-1220
1,6-2,0х1000-1370

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. II-III
surface finish group.
Inner diameter of
750 ± 50 mm, weight
up to 15 tons
Edge O. II-III
surface finish
group. Inner
diameter of
500 ± 50 mm
(“Zundvig”),
508 ± 50 mm and
610 ± 50 mm
(APR-5)

0,8-1,5х1000-1250
1,6-2,0х1000-1400
0,8-1,5х1000-1220
1,6-2,0х1000-1370

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. II-III
surface finish
group. Inner
diameter of
750 ± 50 mm,
weight up to
15 tons
Edge O. II-III
surface finish
group. Inner
diameter of
500 ± 50 mm
(“Zundvig”),
508 ± 50 mm
and 610 ± 50 mm
(APR-5)

0,5х1000-1050
0,6х1000-1220
0,65-0,7х1000-1250
0,8-1,0х1000-1250
1,1-1,2х1000-1360
1,3-2,0х1000-1500
0,5х1000
0,6х1000-1190
0,65-0,7х1000-1220
0,8-1,0х1000-1220
1,1-1,2х1000-1330
1,3-2,0х1000-1470

DSTU 2834-94
(GOST 16523-97),
GOST 9045-93
GOST 19904-90
DSTU 2834-94
(GOST 16523-97),
GOST 9045-93
GOST 19904-90

Edge NO, II-III c.
surface finishes.
Inner diameter of
750 ± 50 mm, coil
weight up to 15 tons
Edge O, II-III c.
surface finishes.,
weight up to 15 tons
(3 m to 6 m –
“Zundvig”). Ext.
diameter of
500 ± 50 mm
(“Zundvig”)
508 ± 50 mm or
610 mm ± 50 ASP
(5) 600 ± 50 mm
(APR-4)

0,8-0,9х1000 roll
1,0-1,5х1000-1250 roll
1,6-2,0х1000-1400 roll
0,8-0,9х970 roll
1,0-1,5х1000-1220 roll
1,6-2,0х1000-1370 roll.

DSTU 2834-94
(GOST 16523-97)
GOST 19904-90
DSTU 2834-94
(GOST 16523-97)
GOST 19904-90

Edge NO. II-III
surface finish group.
Inner diameter of
750 ± 50 mm, weight
up to 15 tons
Delivery category
4 DSTU 2834-94
(GOST 16523-97)
Edge O. II-III
surface finish group.
Inner diameter of
600 ± 50 mm (ACR-4),
weight up to 15 tons
Delivery category
4 DSTU 2834-94
(GOST 16523-97)